LSI SAS 1098

[David Ash]

Peter Lauda wrote:
> I'm using a new LSI SAS 1098 controller and I want to try to find a 
> utility/package that will let me monitor the status of the RAID under 
> this controller. Does anyone know of a tool that I can use to do this?
> 
> I poked around in /proc to see if there is anything that looks like a 
> RAID status and while I do see info on the controller, I don't see 
> anything re; raid status or I'd write my own monitor.
> 
> I've contacted LSI support but they have not been much help to this point.

If this was software raid you would do:
#cat /proc/mdstatus

If this is hardware raid you would have to use the tools supplied by 
your hardware vendor.  If there are no linux based monitoring tools you 
would have to get into the bios to see the raid status.

Regards
Dave