Temperature

Brian Marr cabernet at internode.on.net
Wed Dec 18 11:25:31 CST 2002


Suse 8.0 box

I have just had an excellent response from this software.
Started here
Gringo:/home/magpie # sensors-detect
 This program will help you to determine which I2C/SMBus modules you need to
 load to use lm_sensors most effectively..........blah blah.

Followed the script as best I could. Lsmod is now showing

Gringo:/home/magpie # lsmod
Module                  Size  Used by    Tainted: PF
i2c-dev                 3520   0  (unused)
i2c-philips-par         1960   0  (unused)
i2c-algo-bit            7052   0  [i2c-philips-par]
i2c-piix4               3524   0  (unused)
i2c-proc                6016   0  (unused)
i2c-core               12320   0  [i2c-dev i2c-algo-bit i2c-piix4 i2c-proc]

The script tells me that I need these
# I2C adapter drivers
modprobe i2c-isa
# I2C chip drivers
modprobe w83781d


modprobe works ok
Gringo:/home/magpie # modprobe i2c-isa
Gringo:/home/magpie # modprobe w83781d

Then I get this

Gringo:/home/magpie # sensors
w83781d-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 5000
Algorithm: Non-I2C SMBus adapter
VCore 1:   +2.01 V  (min =  +1.80 V, max =  +2.20 V)
VCore 2:   +2.00 V  (min =  +1.80 V, max =  +2.20 V)
+3.3V:     +3.42 V  (min =  +2.97 V, max =  +3.63 V)
+5V:       +4.84 V  (min =  +4.50 V, max =  +5.48 V)
+12V:     +11.97 V  (min = +10.79 V, max = +13.11 V)
-12V:     -11.54 V  (min = -10.78 V, max = -13.18 V)
-5V:       -4.98 V  (min =  -4.50 V, max =  -5.48 V)
fan1:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
fan2:     42187 RPM  (min = 3000 RPM, div = 2)
fan3:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
temp1:    +32.0°C   (limit = +60°C, hysteresis = +50°C)
temp2:    +36.5°C   (limit = +60°C, hysteresis = +50°C)
temp3:    +39.0°C   (limit = +60°C, hysteresis = +50°C)
vid:      +2.00 V
alarms:   Chassis intrusion detection
beep_enable:
          Sound alarm disabled

w83781d-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1:   +2.04 V  (min =  +1.80 V, max =  +2.20 V)
VCore 2:   +2.00 V  (min =  +1.80 V, max =  +2.20 V)
+3.3V:     +3.42 V  (min =  +2.97 V, max =  +3.63 V)
+5V:       +4.84 V  (min =  +4.50 V, max =  +5.48 V)
+12V:     +11.78 V  (min = +10.79 V, max = +13.11 V)
-12V:     -11.61 V  (min = -10.78 V, max = -13.18 V)
-5V:       -4.98 V  (min =  -4.50 V, max =  -5.48 V)
fan1:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
fan2:     35526 RPM  (min = 3000 RPM, div = 2)
fan3:        0 RPM  (min = 3000 RPM, div = 2)              ALARM
temp1:    +33.0°C   (limit = +60°C, hysteresis = +50°C)
temp2:    +36.5°C   (limit = +60°C, hysteresis = +50°C)
temp3:    +39.0°C   (limit = +60°C, hysteresis = +50°C)
vid:      +2.00 V
alarms:   Chassis intrusion detection
beep_enable:
          Sound alarm disabled

Many thanks Peter !
Brian Marr





On Wednesday 18 December 2002 09:52, Freeman, Peter (ERHS) wrote:
> >Unfortunately this box doesn't have the goods.
> >
> >magpie at Gringo:~> sensors
> >No sensors found!
>
> If I remember correctly there's a "sensors-conf" or something
> similar which you need to run before running sensors, it's an
> autodiscover util which decides if your board has any monitorable
> devices.

-- 
LinuxSA WWW: http://www.linuxsa.org.au/ IRC: #linuxsa on irc.openprojects.net
To unsubscribe from the LinuxSA list:
  mail linuxsa-request at linuxsa.org.au with "unsubscribe" as the subject



More information about the linuxsa mailing list