LinuxSA Mailing list archives

  From: Robyn Manning <rmanning@adam.com.au>
  To  : <ridefast@ozemail.com.au>
  Date: 20 May 2002 00:45:38 +0930

Re: CD Burning Problems

Hi

If you're using a CD-RW you could try erasing the disk and burning
again.

Robyn

On Thu, 2002-05-16 at 20:07, Jayson Hay wrote:
> 
> Hi,
> 
> I'm having problems burning some CD's. 
> Here is the output from cdrecord (via xcdroast) in the hope that someone
> can make more sense of it than I...
> 
> --------------------------------------------------
> pregap1: -1
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Linux sg driver version: 2.1.39
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'RICOH   '
> Identifikation : 'CD-R/RW MP7083A '
> Revision       : '1.20'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1343488 = 1312 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  586 MB         padsize:  30 KB
> Total size:     674 MB (66:47.08) = 300531 sectors
> Lout start:     674 MB (66:49/06) = 300531 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in:  -11689 (97:26/11)
> ATIP start of lead out: 337465 (75:01/40)
> speed low: 0 speed high: 4
> power mult factor: 4 6
> recommended erase/write power: 3
> Disk type:    Phase change
> Manuf. index: 19
> Manufacturer: POSTECH Corporation
> Blocks total: 337465 Blocks current: 337465 Blocks remaining: 36934
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> CDB:  2A 00 00 00 08 7A 00 00 1F 00
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> Sense Bytes: 71 00 05 00 00 00 00 0C 00 00 00 00 10 02 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Key: 0x5 Illegal Request, deferred error, Segment 0
> Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier]
> Fru 0x0 Sense flags: Blk 0 (not valid)
> 
> write track data: error after 4444160 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
> Writing  time:  116.490s
> Fixating...
> Fixating time:    0.007s
> --------------------------------------------------
> 
> If you need any more info, please let me know.
> Sorry for such a large post.
> 
> jay
> 
> ----------------------------
> ii swear I never use vi^[:wq
> ----------------------------
> 
> -- 
> LinuxSA WWW: http://www.linuxsa.org.au/  IRC: #linuxsa on irc.linux.org.au
> To unsubscribe from the LinuxSA list:
>   mail linuxsa-request@linuxsa.org.au with "unsubscribe" as the subject
> 
> 


-- 
LinuxSA WWW: http://www.linuxsa.org.au/  IRC: #linuxsa on irc.linux.org.au
To unsubscribe from the LinuxSA list:
  mail linuxsa-request@linuxsa.org.au with "unsubscribe" as the subject