LinuxSA Mailing list archives

  From: Jayson Hay <ridefast@ozemail.com.au>
  To  : <linuxsa@linuxsa.org.au>
  Date: Thu, 16 May 2002 20:07:04 +0930

CD Burning Problems

Hi,

I'm having problems burning some CD's. 
Here is the output from cdrecord (via xcdroast) in the hope that someone
can make more sense of it than I...

--------------------------------------------------
pregap1: -1
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'RICOH   '
Identifikation : 'CD-R/RW MP7083A '
Revision       : '1.20'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1343488 = 1312 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  586 MB         padsize:  30 KB
Total size:     674 MB (66:47.08) = 300531 sectors
Lout start:     674 MB (66:49/06) = 300531 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in:  -11689 (97:26/11)
ATIP start of lead out: 337465 (75:01/40)
speed low: 0 speed high: 4
power mult factor: 4 6
recommended erase/write power: 3
Disk type:    Phase change
Manuf. index: 19
Manufacturer: POSTECH Corporation
Blocks total: 337465 Blocks current: 337465 Blocks remaining: 36934
Starting to write CD/DVD at speed 2 in write mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
CDB:  2A 00 00 00 08 7A 00 00 1F 00
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
Sense Bytes: 71 00 05 00 00 00 00 0C 00 00 00 00 10 02 00 00
status: 0x2 (CHECK CONDITION)
Sense Key: 0x5 Illegal Request, deferred error, Segment 0
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier]
Fru 0x0 Sense flags: Blk 0 (not valid)

write track data: error after 4444160 bytes
Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
Writing  time:  116.490s
Fixating...
Fixating time:    0.007s
--------------------------------------------------

If you need any more info, please let me know.
Sorry for such a large post.

jay

----------------------------
ii swear I never use vi^[:wq
----------------------------

-- 
LinuxSA WWW: http://www.linuxsa.org.au/  IRC: #linuxsa on irc.linux.org.au
To unsubscribe from the LinuxSA list:
  mail linuxsa-request@linuxsa.org.au with "unsubscribe" as the subject