LinuxSA Mailing list archives

  From: Glen Turner <glen.turner@aarnet.edu.au>
  To  : <linuxsa@linuxsa.org.au>
  Date: Fri, 01 Dec 2000 23:51:04 +1030

Cardbus PC cards and 2.4-test11

Are there are known issue with Cardbus PC cards and kernel 2.4?

Normal 5V 16 bit PC cards work fine, but puting a 3.3V 32 bit
cardbus card into slot 1 says:

> kernel: cs: socket cba0f000 timed out during reset.  Try increasing setup_delay.

regardless of the value of setup_delay (numbers up to 500 tested).

OS: Red Hat Linux 7, all current patches
Kernel: linux-2.4.0-test11, PCMCIA configured as modules
PCMCIA user space utils: Red Hat RPM kernel-pcmcia-cs-2.4.0-0.37
Hardware: Dell Latitude CPi H540GT
          3Com 3CCFE575CT-D 10/100 Ethernet 32 bit Cardbus 3.3V

Messages upon /etc/rc.d/init.d/pcmcia start without a
cardbus card in slot 1.

> Intel PCIC probe: 
>   Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
>     host opts [0]: none
>     host opts [1]: none
>     ISA irqs (default) = 3,4,7,10,11,12,15 polling interval = 1000 ms
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0800-0x08ff: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x378-0x37f 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> cs: memory probe 0x0d0000-0x0dffff: clean.
> ttyS01 at port 0x02f8 (irq = 3) is a 16550A

Suggestions welcomed,
Glen

-- 
 Glen Turner                                 Network Engineer
 (08) 8303 3936      Australian Academic and Research Network
 glen.turner@aarnet.edu.au          http://www.aarnet.edu.au/
--
 The revolution will not be televised, it will be digitised

-- 
LinuxSA WWW: http://www.linuxsa.org.au/  IRC: #linuxsa on irc.linux.org.au
To unsubscribe from the LinuxSA list:
  mail linuxsa-request@linuxsa.org.au with "unsubscribe" as the subject